DA200T
4EVAC Amplifier module
4EVAC Amplifier module
Depending on the application it can deliver up to 200 Watts continues power. Each DA200 amplifier delivers 2 x 100 Watt or can be linked into 1 x 200 Watts ‘bridge mode’ in case of return-loop zone methods in combination with Loopdrive or with the SW6 Switching module.
Each COMPACT has by default adequate PSE and battery charging capacity to serve a maximum loudspeaker load of 600 Watts RMS in EMERGENCY mode that can be assigned to the DA200 as follows:
• 3 pcs. DA200, 6 x 100 W RMS.
• 2 pcs. DA200, 4 x 100 W RMS (in case of a 4 zone 100W configuration);
• 2 pcs. DA200, 2 x 200 W (bridge-mode in case of a 2-zone 200 W configuration i.e. combinations with LDB-01 – Loopdrive and SW6 Switching module;
Or any of above combination within a maximum speaker load of 600 W RMS (Pink-noise).
System security:
• AC End-of-line monitoring;
• Earth fault detection;
• RS485 interface with the LDB-01, Loopdrive Booster;
• Sleep mode function on the amplifiers
• Protected against overload if short-circuited by means of controlled voltage regulation (VCA)
• Protected against overheating.
Sophisticated Audio/Voice Evacuation
• True multi-channel audio allows each node to broadcast up to six simultaneous and unique alarm and alert messages;
• Synchronized pre-recorded audio signaling across nodes plus two ‘live-streams’ broadcast over all nodes to control common areas;
• Digitized voice messages utilizing custom .wav files;
• Paging from a central location and/or any node to broadcast into local or global zones.
Sophisticated Audio/Voice Evacuation
• True multi-channel audio allows each node to broadcast up to six simultaneous and unique alarm and alert messages;
• Synchronized pre-recorded audio signaling across nodes plus two ‘live-streams’ broadcast over all nodes to control common areas;
• Digitized voice messages utilizing custom .wav files;
• Paging from a central location and/or any node to broadcast into local or global zones.
Depending on the application it can deliver up to 200 Watts continues power. Each DA200 amplifier delivers 2 x 100 Watt or can be linked into 1 x 200 Watts ‘bridge mode’ in case of return-loop zone methods in combination with Loopdrive or with the SW6 Switching module.
Each COMPACT has by default adequate PSE and battery charging capacity to serve a maximum loudspeaker load of 600 Watts RMS in EMERGENCY mode that can be assigned to the DA200 as follows:
• 3 pcs. DA200, 6 x 100 W RMS.
• 2 pcs. DA200, 4 x 100 W RMS (in case of a 4 zone 100W configuration);
• 2 pcs. DA200, 2 x 200 W (bridge-mode in case of a 2-zone 200 W configuration i.e. combinations with LDB-01 – Loopdrive and SW6 Switching module;
Or any of above combination within a maximum speaker load of 600 W RMS (Pink-noise).
System security:
• AC End-of-line monitoring;
• Earth fault detection;
• RS485 interface with the LDB-01, Loopdrive Booster;
• Sleep mode function on the amplifiers
• Protected against overload if short-circuited by means of controlled voltage regulation (VCA)
• Protected against overheating.
Sophisticated Audio/Voice Evacuation
• True multi-channel audio allows each node to broadcast up to six simultaneous and unique alarm and alert messages;
• Synchronized pre-recorded audio signaling across nodes plus two ‘live-streams’ broadcast over all nodes to control common areas;
• Digitized voice messages utilizing custom .wav files;
• Paging from a central location and/or any node to broadcast into local or global zones.
Sophisticated Audio/Voice Evacuation
• True multi-channel audio allows each node to broadcast up to six simultaneous and unique alarm and alert messages;
• Synchronized pre-recorded audio signaling across nodes plus two ‘live-streams’ broadcast over all nodes to control common areas;
• Digitized voice messages utilizing custom .wav files;
• Paging from a central location and/or any node to broadcast into local or global zones.
Combining over 30 years experience in voice alarm manufacture, 4EVAC delivers a new class of Voice-Alarm Control and Indication Equipment solutions.
Based in Rotterdam, 4EVAC is a trading division of Hacousto Holland BV. Headed by Director Albert Van Der Hout and his team, 4EVAC is committed to providing cost-effective VACIE systems that break the mould of traditional solutions.
Our mission: Supplying a modern generation of products that are based on a 'plug in and play' principle.
Offering systems that are as well as compact as modular, 4EVAC has designed its products to meet the demands of installers and users alike. Demystifying the traditional ‘rack-mounted’ systems that rely on complex configuration, 4EVAC has made IMPACT VOICE ALARM SYSTEM range of products with remote controlled zone-expanders.
Set apart by its design the Compact C500, offers a lean design footprint and makes for lean, cost effective installation and operation. Comprising self-contained compact Wall-mounted Control and Indicating Voice-Alarm panels, the C500 offers a ‘mean’ and powerful solution, providing an advanced digital audio-distribution on a networked VACIE solution.
Designing and manufacturing its products in Europe to rigorous specifications, 4EVAC delivers unparalleled quality and reliability. Fully compliant with the EN54-16 certification, for additional peace of mind all 4EVAC products are third party approved and certified to all European standards including: EN54-4, EN54-16, EN54-17 and EN54-18.
7 andra produkter i samma kategori:
Tap to zoom
