RDL Networked Mic Input and Selectable Monitor Station
TP-BN14
Networked Mic Input and Selectable Monitor Station
Microphone to Network Section:
• Converts a Standard Mic Source to a Dante Network Channel
• Mute Button Toggles Output On and Off or Provides Momentary Muting
• Automatic Microphone Gain for Condenser or Dynamic Mics
• P48 Phantom is Provided on the Microphone Input
Network to Speaker Section:
• 2 Watt RMS Audio Amplifier
• Compressor/Limiter Prevents Clipping
• Speaker Audio Source may be a Dedicated Channel or Follow Headphones*
Network to Headphone Section:
• Selection from 3 or 4 Mono Dante Network Sources to a Stereo Headphone
• Single-Button Selection for Each Source with LED Indication
• Upper Button Selects “OFF” or Speaker Source*
• Front-Panel Output Level Control
Common:
• Adjustment and Switch Settings on the Chassis Bottom*
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Normal or Hot-Standby Operation from PoE
*set by installer
The TP-BN14 is a bidirectional Dante network interface for tabletop use. The unit provides a shock-mounted XLR microphone input with a mute button. A front-panel 2W amplified speaker provides monitoring of a specific audio mix.
The TP-BN14 provides a front-panel headphone Mini-jack with an associated four input source selector. LEDs associated with the input buttons indicate the selected source.
The front panel level control is a long-life potentiometer controlling a VCA. Audio does not pass through this control, assuring years of noise free level adjustment. The output amplifiers deliver more than 90 mW into either high or low impedance headphones. The headphone output may be used to listen to different language translations.
The TP-BN14 may be powered from a 24 Vdc power supply, available separately, or from PoE. It is used in meeting halls, conference rooms or courtrooms.
TP-BN14
Networked Mic Input and Selectable Monitor Station
Microphone to Network Section:
• Converts a Standard Mic Source to a Dante Network Channel
• Mute Button Toggles Output On and Off or Provides Momentary Muting
• Automatic Microphone Gain for Condenser or Dynamic Mics
• P48 Phantom is Provided on the Microphone Input
Network to Speaker Section:
• 2 Watt RMS Audio Amplifier
• Compressor/Limiter Prevents Clipping
• Speaker Audio Source may be a Dedicated Channel or Follow Headphones*
Network to Headphone Section:
• Selection from 3 or 4 Mono Dante Network Sources to a Stereo Headphone
• Single-Button Selection for Each Source with LED Indication
• Upper Button Selects “OFF” or Speaker Source*
• Front-Panel Output Level Control
Common:
• Adjustment and Switch Settings on the Chassis Bottom*
• High Resolution 24 Bit Analog to Digital and Digital to Analog Conversion
• Normal or Hot-Standby Operation from PoE
*set by installer
The TP-BN14 is a bidirectional Dante network interface for tabletop use. The unit provides a shock-mounted XLR microphone input with a mute button. A front-panel 2W amplified speaker provides monitoring of a specific audio mix.
The TP-BN14 provides a front-panel headphone Mini-jack with an associated four input source selector. LEDs associated with the input buttons indicate the selected source.
The front panel level control is a long-life potentiometer controlling a VCA. Audio does not pass through this control, assuring years of noise free level adjustment. The output amplifiers deliver more than 90 mW into either high or low impedance headphones. The headphone output may be used to listen to different language translations.
The TP-BN14 may be powered from a 24 Vdc power supply, available separately, or from PoE. It is used in meeting halls, conference rooms or courtrooms.
1 andra produkter i samma kategori:
Tap to zoom
