EV 15in 2-way coaxial loudspeaker, 90°x40°, full-range, black, EN54
The Electro-Voice EVH-1152D/94 is a high-power,
two-way horn-loaded coaxial loudspeaker system that
can be used in a wide variety of applications where
excellent intelligibility, wide bandwidth directivity
control, and high efficiency are required in a compact,
cost-effective package.
For high frequencies, the EVH-1152D/94 utilizes the
DH7N, a high-output 3-inch titanium compression
driver, coupled to a rotatable Constant Directivity
90° x 40° waveguide. Both the mid-bass and high
frequency waveguides may be rotated to maintain
uniform pattern control over the entire critical vocal
range regardless of enclosure orientation. For low
frequencies, the SMX2151 15-inch woofer was
developed using FEA optimization for motor,
suspension, and electrical design to ensure very low
distortion, high efficiency, and maximum intelligibility
at high SPL. The crossover uses steep,
24-dB per-octave slopes with equalization for very
smooth response in the vocal range, linear off-axis
response, and an HF protection circuit for long-term
reliability. This combination of technologies results in
extended frequency response and excellent pattern
control down to 500 Hz.
▪ Rotatable Mid-bass and High Frequency Waveguides
for consistent pattern control down to 500 Hz
▪ Integrated Passive Network with PTP High
Frequency Protection
▪ PI and FG versions available with gland nut and
stainless-steel grille rated IEC 60529 IP55
▪ Integrates easily with EVF Low Frequency and
Subwoofer Systems
▪ EN54-24 type B certification 1438/CPR/0299 with
CDG cover installed (Only available in select regions)
The Electro-Voice EVH-1152D/94 is a high-power,
two-way horn-loaded coaxial loudspeaker system that
can be used in a wide variety of applications where
excellent intelligibility, wide bandwidth directivity
control, and high efficiency are required in a compact,
cost-effective package.
For high frequencies, the EVH-1152D/94 utilizes the
DH7N, a high-output 3-inch titanium compression
driver, coupled to a rotatable Constant Directivity
90° x 40° waveguide. Both the mid-bass and high
frequency waveguides may be rotated to maintain
uniform pattern control over the entire critical vocal
range regardless of enclosure orientation. For low
frequencies, the SMX2151 15-inch woofer was
developed using FEA optimization for motor,
suspension, and electrical design to ensure very low
distortion, high efficiency, and maximum intelligibility
at high SPL. The crossover uses steep,
24-dB per-octave slopes with equalization for very
smooth response in the vocal range, linear off-axis
response, and an HF protection circuit for long-term
reliability. This combination of technologies results in
extended frequency response and excellent pattern
control down to 500 Hz.
▪ Rotatable Mid-bass and High Frequency Waveguides
for consistent pattern control down to 500 Hz
▪ Integrated Passive Network with PTP High
Frequency Protection
▪ PI and FG versions available with gland nut and
stainless-steel grille rated IEC 60529 IP55
▪ Integrates easily with EVF Low Frequency and
Subwoofer Systems
▪ EN54-24 type B certification 1438/CPR/0299 with
CDG cover installed (Only available in select regions)
- Typ
- Två-vägs, hornladdad, full-range högtalare
- Frekvensomfång
- 60 – 17.000 (-3 dB), 50 - 20.000 (-10 dB) Hz
- Kontakter in
- Phoenix/Euroblock skruvterminaler
- Mått (BxHxD)
- 768,6 x 768,6 x 680,1 mm
- Vikt
- 66,1 kg
- Färg
- Svart
- Spridning
- 90 x 40 °
- Max SPL 1m
- 138 dB
- Delningsfrekvens
- 1300 Hz
- Baselement
- 15″ SMX2151
- Diskantelement
- 3″ DH7N kompressordriver
- Material
- 13-lagers väderbeständig björk, EVCoat
- Monteringsbygel
- 28 M10 gängade fästpunkter
- Effekttålighet
- 500 (kontinuerlig, 2000 (peak) W
- Känslighet 1W/1m
- 105 dB
- Impedans
- 8 (nominal), 6 (minimum) Ω