BB OmniCALL EXP Panel Up to 32 Way (No UI/Batteries) - Steel
OmniCALL – Network Expansion Panel (32 way)
The OmniCALL Expansion Panel connects to an OmniCALL Master Station to allow the addressable Emergency Voice Communication (EVC) system to grow with a further 32 outstations.
The OmniCALL OCEPS provides a practical way to expand an Emergency Voice Communication (EVC) system across multiple areas, buildings or phases of a project.
It operates as a networked expansion panel without a user interface or handset, adding capacity while keeping the main control panels centralised and easy to manage.
Flexible System Growth
• Supports up to 32 outstations and 32 assistance alarms as standard
• One line card fitted as standard
• Up to three additional line cards can be fitted
• With four cards installed:
• Up to four loops with a maximum of 32 outstations spread across the loops in any combination or
• Up to 16 radial circuits
• Or a mix of loop and radial circuits in any configuration up to a maximum of 32 outstations
Networked System Design
• Up to 100 OmniCALL panels on one system
• Typical system capacity of 512 outstations and 512 assistance alarms
• Larger capacities available on request
• Built-in copper networking using 4-core FP200 cabling up to 200 metres per span
• Optional fibre modules:
• Single mode up to 4km
• Multi mode up to 2km
Built-in Resilience
• Internal batteries sized to project requirements
• Fully monitored system operation
• Two-core non-polarity-dependent wiring
OCEPS delivers structured, scalable system expansion without adding unnecessary complexity.
Technical Data
Power Supply: 85-264VAC
Power Consumption: 75W
Humidity Range: 95% non-condensing
Temperature Range: -5°C to +40°C
Indicators: Power & Fault LEDs, Lamp Test/Accept button
Finish: RAL 9005
Dimensions: 430 x 430 x 190 mm (W x H x D)
Bezel dimensions: 470 x 470 mm (W x H)
Bezel cutout: 440 x 440 mm (W x H)
Mounting height (to centre): 1400-1500 mm
Knockouts/cable entry points: 20mm x 24 (Top)
Compliance:
• BS 5839-9: Code of practice for design, installation and maintenance of emergency voice communication systems
• BS 8893: Emergency voice communication (EVC) systems. Components. Specification.
• BS 8300-1: Code of practice for the design of an accessible and inclusive built environment
• BS 9991: Fire safety in the design, management and use of residential buildings
• BS 9999: Fire safety in the design, management and use of buildings
OmniCALL – Network Expansion Panel (32 way)
The OmniCALL Expansion Panel connects to an OmniCALL Master Station to allow the addressable Emergency Voice Communication (EVC) system to grow with a further 32 outstations.
The OmniCALL OCEPS provides a practical way to expand an Emergency Voice Communication (EVC) system across multiple areas, buildings or phases of a project.
It operates as a networked expansion panel without a user interface or handset, adding capacity while keeping the main control panels centralised and easy to manage.
Flexible System Growth
• Supports up to 32 outstations and 32 assistance alarms as standard
• One line card fitted as standard
• Up to three additional line cards can be fitted
• With four cards installed:
• Up to four loops with a maximum of 32 outstations spread across the loops in any combination or
• Up to 16 radial circuits
• Or a mix of loop and radial circuits in any configuration up to a maximum of 32 outstations
Networked System Design
• Up to 100 OmniCALL panels on one system
• Typical system capacity of 512 outstations and 512 assistance alarms
• Larger capacities available on request
• Built-in copper networking using 4-core FP200 cabling up to 200 metres per span
• Optional fibre modules:
• Single mode up to 4km
• Multi mode up to 2km
Built-in Resilience
• Internal batteries sized to project requirements
• Fully monitored system operation
• Two-core non-polarity-dependent wiring
OCEPS delivers structured, scalable system expansion without adding unnecessary complexity.
Technical Data
Power Supply: 85-264VAC
Power Consumption: 75W
Humidity Range: 95% non-condensing
Temperature Range: -5°C to +40°C
Indicators: Power & Fault LEDs, Lamp Test/Accept button
Finish: RAL 9005
Dimensions: 430 x 430 x 190 mm (W x H x D)
Bezel dimensions: 470 x 470 mm (W x H)
Bezel cutout: 440 x 440 mm (W x H)
Mounting height (to centre): 1400-1500 mm
Knockouts/cable entry points: 20mm x 24 (Top)
Compliance:
• BS 5839-9: Code of practice for design, installation and maintenance of emergency voice communication systems
• BS 8893: Emergency voice communication (EVC) systems. Components. Specification.
• BS 8300-1: Code of practice for the design of an accessible and inclusive built environment
• BS 9991: Fire safety in the design, management and use of residential buildings
• BS 9999: Fire safety in the design, management and use of buildings
Tap to zoom