FIM-01
4EVAC Loopdrive Fault Isolator Module
4EVAC Loopdrive Fault Isolator Module
The Loopdrive originally designed housing in combination with colored WAGO push-terminals are a guarantee for a fast and correct installation of the device. The transparent cover enhances the emitting light signals from the on-board status indicators of the FIM. Fault indications can be easily identified during installation.
An external General Fault indicator output can drive a remote indicator where visual status feedback of the FIM is requested.
The WAGO push terminals used on the FIM accept from 0,8 to 2,5 mm2 core installation cable. A simple but effective tie-wrap quickly secures the cable onto the loopdrive housing.
An additional adapter can be ordered to the unit that increase the IP-rating from IP21 to IP33 by adding compression glands that take up 8 to 13 mm sized installation cable.
Complementary 20 mm gland allows for quick and easy installation onto the firedome of the loudspeaker using one of the existing cable gland entries of the loudspeaker.
The LoopDrive plug and play wiring range of devices revolutionize the way audio isolator systems are installed. It cuts installation costs, reduces waste, improves site efficiency, enhances site safety and accelerates construction programmes.
Main benefits:
• Reduced installation costs
• Quick and simple to install
Cables can be ordered in pre-determined lengths with factory fitted and tested plugs at either end. These loop cables plug directly into the plug and play adapter with fitting female sockets and are locked into place with minimum effort.
Plug-and-Play key features:
• Reduced installation time by up to 70%
• Rugged components – Factory Assembled
• Minimal skill level required
• Certainty of correct installation
• Easily integrated with conventional installation methods.
The Loopdrive originally designed housing in combination with colored WAGO push-terminals are a guarantee for a fast and correct installation of the device. The transparent cover enhances the emitting light signals from the on-board status indicators of the FIM. Fault indications can be easily identified during installation.
An external General Fault indicator output can drive a remote indicator where visual status feedback of the FIM is requested.
The WAGO push terminals used on the FIM accept from 0,8 to 2,5 mm2 core installation cable. A simple but effective tie-wrap quickly secures the cable onto the loopdrive housing.
An additional adapter can be ordered to the unit that increase the IP-rating from IP21 to IP33 by adding compression glands that take up 8 to 13 mm sized installation cable.
Complementary 20 mm gland allows for quick and easy installation onto the firedome of the loudspeaker using one of the existing cable gland entries of the loudspeaker.
The LoopDrive plug and play wiring range of devices revolutionize the way audio isolator systems are installed. It cuts installation costs, reduces waste, improves site efficiency, enhances site safety and accelerates construction programmes.
Main benefits:
• Reduced installation costs
• Quick and simple to install
Cables can be ordered in pre-determined lengths with factory fitted and tested plugs at either end. These loop cables plug directly into the plug and play adapter with fitting female sockets and are locked into place with minimum effort.
Plug-and-Play key features:
• Reduced installation time by up to 70%
• Rugged components – Factory Assembled
• Minimal skill level required
• Certainty of correct installation
• Easily integrated with conventional installation methods.
Combining over 30 years experience in voice alarm manufacture, 4EVAC delivers a new class of Voice-Alarm Control and Indication Equipment solutions.
Based in Rotterdam, 4EVAC is a trading division of Hacousto Holland BV. Headed by Director Albert Van Der Hout and his team, 4EVAC is committed to providing cost-effective VACIE systems that break the mould of traditional solutions.
Our mission: Supplying a modern generation of products that are based on a 'plug in and play' principle.
Offering systems that are as well as compact as modular, 4EVAC has designed its products to meet the demands of installers and users alike. Demystifying the traditional ‘rack-mounted’ systems that rely on complex configuration, 4EVAC has made IMPACT VOICE ALARM SYSTEM range of products with remote controlled zone-expanders.
Set apart by its design the Compact C500, offers a lean design footprint and makes for lean, cost effective installation and operation. Comprising self-contained compact Wall-mounted Control and Indicating Voice-Alarm panels, the C500 offers a ‘mean’ and powerful solution, providing an advanced digital audio-distribution on a networked VACIE solution.
Designing and manufacturing its products in Europe to rigorous specifications, 4EVAC delivers unparalleled quality and reliability. Fully compliant with the EN54-16 certification, for additional peace of mind all 4EVAC products are third party approved and certified to all European standards including: EN54-4, EN54-16, EN54-17 and EN54-18.
Tap to zoom
