DB Aktiv subwoofer, 3x18", 2700W RMS, 143 dB max SPL
As for lower frequencies, the VIO series is completed by VIO S318 subwoofer, a one of a kind system both for its acoustic configuration and majestic output. Indeed, dBTechnologies succeded in designing an extraordinary powerful triple 18” woofer system while maximizing its frontal emission and extending lower frequencies.
• Designed to maximize in-phase frontal emission
• On-board delay for perfect time alignment
• On board cardioid array configuration preset
• Frequency range extending down to 35Hz
• Network ready with an integrated RDNet port
VIO S318 is equipped with 3 18” bassreflex half-horn loaded woofers, configured in order to maximize frontal emission. The 3 voice coils are in facts mechanically aligned in order to achieve a perfect phase response.
The 3 DIGIPRO G3 amplifiers deliver a total 2700 W RMS power, allowing the system to reach up to 143dB SPL.
The system features an integrated delay module achieving up to 9.9 ms delay with 0,5 ms steps. The crossover module sets the low pass filter alongside with the highpass filter for the integrated crossover output. The system also features an attenuation control, a polarity switch and a RDnet port for remote control.
The high quality multiplex housing is reinforced with a robust polyurea finishing and equipped with 5 aluminium handles per side.
The dolly transport DT-318 allows to transport up to 3 subs simoultaneously, both on wheels or on lift track. As an alternative to the dolly, wheels can be mounted on the rear side of the cabinet.
Technical Data
Speaker Type Active Bassreflex Semi-Horn-Loaded Subwoofer
Acoustical data
Frequency Response [- 6 dB] 39 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB] 35 Hz (HPF)
Max SPL 143 dB
LF 3x18"
Voice Coil LF 4 "
Directivity Omnidirectional
Amplifier
Amp Technology Digipro® G3
Amp Class Class D
RMS Power 2700 W
Peak Power 5400 W
Cooling Convection
Power Supply 2700 W SMPS with Auto Range PSU
Processor
Controller DSP 64 bit
AD/DA Converter 24 bit/48 KHz
Limiter RMS, Peak, Thermal
Delay Option 0-9.9 ms internal
Steps of 0.1 ms
Crossover Frequency LF-HF 70-105Hz + Full range
LF-Xover out slope 24 dB/Octave
Input
Signal Input 1xXLR balanced
1xRJ45 LINK (RDNet)
Signal Output
1x XLR balanced
1xRJ45 LINK (RDNet)
Power Socket 1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls 1x Input Attenuation Rotary Switch
2x Rotary Encoder (Delay 9.9 ms)
1XPolarity Inversion Switch (0° or 180°)
1xCardioid Mode Switch
1x X-Over Freq Switch (70-105 Hz + Full Range (steps of 5 Hz)
Mechanics
Housing Multiplex plywood
Polyurea painted
Handles 4x Per Side
Aluminium
Raincover Included
Rigging Points 2xPick Points on top to fix DRK-210 rigging frame
Width 1300 mm (51.18 in)
Height 520 mm (20.47 in)
Depth 800 mm (31.5 in)
Weight 103.9 kg (229.06 lbs)
As for lower frequencies, the VIO series is completed by VIO S318 subwoofer, a one of a kind system both for its acoustic configuration and majestic output. Indeed, dBTechnologies succeded in designing an extraordinary powerful triple 18” woofer system while maximizing its frontal emission and extending lower frequencies.
• Designed to maximize in-phase frontal emission
• On-board delay for perfect time alignment
• On board cardioid array configuration preset
• Frequency range extending down to 35Hz
• Network ready with an integrated RDNet port
VIO S318 is equipped with 3 18” bassreflex half-horn loaded woofers, configured in order to maximize frontal emission. The 3 voice coils are in facts mechanically aligned in order to achieve a perfect phase response.
The 3 DIGIPRO G3 amplifiers deliver a total 2700 W RMS power, allowing the system to reach up to 143dB SPL.
The system features an integrated delay module achieving up to 9.9 ms delay with 0,5 ms steps. The crossover module sets the low pass filter alongside with the highpass filter for the integrated crossover output. The system also features an attenuation control, a polarity switch and a RDnet port for remote control.
The high quality multiplex housing is reinforced with a robust polyurea finishing and equipped with 5 aluminium handles per side.
The dolly transport DT-318 allows to transport up to 3 subs simoultaneously, both on wheels or on lift track. As an alternative to the dolly, wheels can be mounted on the rear side of the cabinet.
Technical Data
Speaker Type Active Bassreflex Semi-Horn-Loaded Subwoofer
Acoustical data
Frequency Response [- 6 dB] 39 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB] 35 Hz (HPF)
Max SPL 143 dB
LF 3x18"
Voice Coil LF 4 "
Directivity Omnidirectional
Amplifier
Amp Technology Digipro® G3
Amp Class Class D
RMS Power 2700 W
Peak Power 5400 W
Cooling Convection
Power Supply 2700 W SMPS with Auto Range PSU
Processor
Controller DSP 64 bit
AD/DA Converter 24 bit/48 KHz
Limiter RMS, Peak, Thermal
Delay Option 0-9.9 ms internal
Steps of 0.1 ms
Crossover Frequency LF-HF 70-105Hz + Full range
LF-Xover out slope 24 dB/Octave
Input
Signal Input 1xXLR balanced
1xRJ45 LINK (RDNet)
Signal Output
1x XLR balanced
1xRJ45 LINK (RDNet)
Power Socket 1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls 1x Input Attenuation Rotary Switch
2x Rotary Encoder (Delay 9.9 ms)
1XPolarity Inversion Switch (0° or 180°)
1xCardioid Mode Switch
1x X-Over Freq Switch (70-105 Hz + Full Range (steps of 5 Hz)
Mechanics
Housing Multiplex plywood
Polyurea painted
Handles 4x Per Side
Aluminium
Raincover Included
Rigging Points 2xPick Points on top to fix DRK-210 rigging frame
Width 1300 mm (51.18 in)
Height 520 mm (20.47 in)
Depth 800 mm (31.5 in)
Weight 103.9 kg (229.06 lbs)
4 andra produkter i samma kategori:
Tap to zoom
