EVA-1151D-PIB

EVA-1151D-PIB

EV Single DVX3159, EVCOAT, PI-weatherized, black

Logga in för priser
EVA-1151D-PIB
 
EV Single DVX3159, EVCOAT, PI-weatherized, black


• Compact design rigs with EVA full-range modules
• Hidden suspension hardware (included) isaesthetically pleasing
• Three finishes available — standard, PI, andfiberglass
• 98 dB sensitivity
• 500 W continuous power capacity (2,000 W peak)
• 125/131 dB maximum SPL (continuous/peak)
• EVADA (EVA Design Assistant) software toolavailable


The Electro-Voice EVA-1151D is a high-power, front-loaded subwoofer module for use with EVA full-range line-array modules. It
can be arrayed on top of an EVA full-range array using an EVASG2 standard or EVA-EG2 extended grid, or behind a full-range
EVA array using the EVA-CG coupler grid, which allows subs to
be flown in the array without increasing trim height. Up to three
EVA-1151D subwoofer modules and five full-range modules may
be flown in this configuration from a single hang point. The unique
acoustic and integrated rigging design of the EVA series also allows for construction of vertical arrays up to eight modules high
using any combination of EVA-1151D and/or EVA-2082S modules.
For rigging information please refer to the EVA User Manual available at www.electrovoice.com.
The EVA-1151D has been designed exclusively for fixed installation applications. The DVX3159A 15” woofer is specially designed
for subwoofer duty to provide reliable low-frequency performance
with solid impact and low distortion at high sound pressure levels.
The enclosure is constructed of 18-mm 13-ply birch plywood reinforced with internal steel rigging top to bottom and coated with
EVCoatTM for durability and professional appearance. PI versions
are available for indirect outdoor exposure or fiberglass (FG)
versions for severe exposure applications. PI and FG versions
include the CDG dual-gland-nut input panel cover and stainless
steel three-layer grille. The innovative input panel provides a
choice of Phoenix/Euroblock connectors, optional CDNL4 cover
plate with dual NL4-type connectors or the CSG single-gland-nut
plate for use with cable. Enclosure side-panel covers conceal all
suspension hardware and provide a smooth, monolithic appearance. In keeping with the modular building-block philosophy
behind EVA series loudspeakers, intermodule tie plates included
with the EVA-1151D provide for splays of 0° or 5° between
subwoofer modules to help accommodate the wide variety of
array configurations possible, including stand-alone subwoofer
arrays. For array design please refer to the EVA Design Assistant
(EVADA) software available at www.electrovoice.com.
Typ
Passiv subwoofer
Frekvensomfång
48 - 250 (-3 dB), 35-250 (-10 dB) Hz
Kontakter in
Phoenix/Euroblock skruvterminaler
Mått (BxHxD)
596,9 x 596,9 x 461,3 mm
Vikt
40,4 kg
Färg
Svart
Spridning
Rundstrålande °
Max SPL 1m
131 dB
Delningsfrekvens
80 - 125 Hz
Baselement
15” DVX3159A
Material
Björkplywood med PI-finish
Monteringsbygel
EVA grid (säljs separat)
Effekttålighet
500 (kontinuerlig), 2000 (peak) W
Känslighet 1W/1m
98 dB
Impedans
8 (nominal), 5,8 (minimum) Ω

6 andra produkter i samma kategori: