DB Aktiv 2-vägs line array-högtalare, 2x8" + 1x1.4", 900W RMS
Offering lighter and faster rigging elements, featuring an unique acoustic design, combining long throw and detailed audio performance, the new VIO L208 is both a powerful yet compact stand-alone line array system, and a fully compatible down-fill for VIO L210+ VIO L208 hybrid systems, completed by VIO S Active subwoofers.
FEATURES
• DESIGNED FOR OPTIMIZED ACOUSTIC AND MECHANICAL COMPATIBILITY WITH VIO L210
• NEW ACOUSTIC DESIGN FEATURING ALL-IN-ONE PHASE PLUG AND HF HORN FRONT PANEL
• LOW-LATENCY PROCESSING THANKS TO POWERFUL DSP WITH LINEAR-PHASE FIR FILTERS
• FULLY COMPLIANCE WITH AURORA NET REMOTE CONTROL SOFTWARE
• DSP PRESETS FOR MAXIMUM ACOUSTIC CUSTOMIZATION
• BUILT-IN FLYING HARDWARE ALLOWING FAST & EASY SET UP AND FLYING OPERATIONS
VIO L208 is a 2-way active line array system equipped with 2X8” neodymium woofers and 1X1,4” neodymium compression driver (2.5” voice coil).
The transducers are positioned behind an all-in-one panel that acts as a phase-plug and a HF horn. The waveguide behind this panel contributes to the creation of a cylindrical wave front; much to the advantage of hi-frequency throw distance.
A Class-D Digipro G3 900W amp module with auto-range PSU drives each module of VIO L208.
A perfectly coherent emission is granted thanks to advanced sound processing with FIR filters.
The pre-amp module is also equipped with a digital optical isolation, guaranteeing interference-free input signal.
Just like larger VIO L210 system, VIO 208’s wooden enclosure comes with a built-in rigging system made for simplicity and speed: a back central rigging strand allows to set the relative splay angles, directly in the dedicated transport cart DT-VIOL208, able to house 4 modules plus 1 flying bar. While lifting up the array, the rigging strand will automatically block the systems at the preset angles with no need of heavy lifting.
The dedicated 3-point flying frame DRK 208 allows to set a precise inclination of the array and is ready to carry an optional inclinometer laser pointer. When not in use, the flybar can be easily stored in the transport cart.
AF-VIO1 accessory allows you to rig the module under a VIO S118 flyable subwoofer or, alternatively, to use VIO 208 as down-fill in larger VIO L210 systems. The same accessory also serves as safety interface in stacked configuration on VIO subs.
A lighter accessory transition frame TF-VIO1 allows the installation of VIO L208 under flown VIO L210 only.
VIO L210 features on board presets allowing users to process the system manually. Any preset can be easily changed remotely via Aurora Net control software.
Technical Data
Speaker Type 2-way Active Line Array Module
Acoustical data
Frequency Response [- 6 dB] 75 Hz - 20 KHz
Frequency Response [- 10 dB] 85 Hz -18.1 KHz
Max SPL 133.5 dB
HF 1x1.4"
Voice Coil HF 2.5"
Type HF Neodymium
LF 2x8"
Voice Coil LF 2"
Type LF Neodymium
Horizontal Directivity 100°
Vertical Directivity depends on array size and configuration
Amplifier
Amp Technology Digipro G3
Amp Class Class D
RMS Power 900 W
Peak Power 1800 W
Cooling Convection
Power Supply 900 W SMPS with Auto-range PSU
Processor
Controller DSP 56 bit
AD/DA Converter 24 bit/48 KHz
Limiter Dual Active Peak, RMS, Thermal
Processing (filters) FIR Linear Phase Filters
Crossover Frequency LF-HF 1000 Hz
Input
Signal Input 1xXLR fem, Bal.
Signal Output 1x XLR male, Bal.
Network: RDNet remote control RJ45 connector
IN/OUT
Mains Connections 1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls 1xSpeakers Coupling (7 presets)
1x HF Compensation (8 presets)
1x Input Attenuation Rotary Switch
Mechanics
Housing Multiplex plywood
Polyurea painted
Handles 1x Side, 2 on back
Raincover Included
Rigging Points Integrated 3-point flying hardware
Width 600 mm (25.98 in)
Height 260 mm (10.23 in)
Depth 390 mm (15.35 in)
Weight 18.1 kg (39.9 lbs)
Offering lighter and faster rigging elements, featuring an unique acoustic design, combining long throw and detailed audio performance, the new VIO L208 is both a powerful yet compact stand-alone line array system, and a fully compatible down-fill for VIO L210+ VIO L208 hybrid systems, completed by VIO S Active subwoofers.
FEATURES
• DESIGNED FOR OPTIMIZED ACOUSTIC AND MECHANICAL COMPATIBILITY WITH VIO L210
• NEW ACOUSTIC DESIGN FEATURING ALL-IN-ONE PHASE PLUG AND HF HORN FRONT PANEL
• LOW-LATENCY PROCESSING THANKS TO POWERFUL DSP WITH LINEAR-PHASE FIR FILTERS
• FULLY COMPLIANCE WITH AURORA NET REMOTE CONTROL SOFTWARE
• DSP PRESETS FOR MAXIMUM ACOUSTIC CUSTOMIZATION
• BUILT-IN FLYING HARDWARE ALLOWING FAST & EASY SET UP AND FLYING OPERATIONS
VIO L208 is a 2-way active line array system equipped with 2X8” neodymium woofers and 1X1,4” neodymium compression driver (2.5” voice coil).
The transducers are positioned behind an all-in-one panel that acts as a phase-plug and a HF horn. The waveguide behind this panel contributes to the creation of a cylindrical wave front; much to the advantage of hi-frequency throw distance.
A Class-D Digipro G3 900W amp module with auto-range PSU drives each module of VIO L208.
A perfectly coherent emission is granted thanks to advanced sound processing with FIR filters.
The pre-amp module is also equipped with a digital optical isolation, guaranteeing interference-free input signal.
Just like larger VIO L210 system, VIO 208’s wooden enclosure comes with a built-in rigging system made for simplicity and speed: a back central rigging strand allows to set the relative splay angles, directly in the dedicated transport cart DT-VIOL208, able to house 4 modules plus 1 flying bar. While lifting up the array, the rigging strand will automatically block the systems at the preset angles with no need of heavy lifting.
The dedicated 3-point flying frame DRK 208 allows to set a precise inclination of the array and is ready to carry an optional inclinometer laser pointer. When not in use, the flybar can be easily stored in the transport cart.
AF-VIO1 accessory allows you to rig the module under a VIO S118 flyable subwoofer or, alternatively, to use VIO 208 as down-fill in larger VIO L210 systems. The same accessory also serves as safety interface in stacked configuration on VIO subs.
A lighter accessory transition frame TF-VIO1 allows the installation of VIO L208 under flown VIO L210 only.
VIO L210 features on board presets allowing users to process the system manually. Any preset can be easily changed remotely via Aurora Net control software.
Technical Data
Speaker Type 2-way Active Line Array Module
Acoustical data
Frequency Response [- 6 dB] 75 Hz - 20 KHz
Frequency Response [- 10 dB] 85 Hz -18.1 KHz
Max SPL 133.5 dB
HF 1x1.4"
Voice Coil HF 2.5"
Type HF Neodymium
LF 2x8"
Voice Coil LF 2"
Type LF Neodymium
Horizontal Directivity 100°
Vertical Directivity depends on array size and configuration
Amplifier
Amp Technology Digipro G3
Amp Class Class D
RMS Power 900 W
Peak Power 1800 W
Cooling Convection
Power Supply 900 W SMPS with Auto-range PSU
Processor
Controller DSP 56 bit
AD/DA Converter 24 bit/48 KHz
Limiter Dual Active Peak, RMS, Thermal
Processing (filters) FIR Linear Phase Filters
Crossover Frequency LF-HF 1000 Hz
Input
Signal Input 1xXLR fem, Bal.
Signal Output 1x XLR male, Bal.
Network: RDNet remote control RJ45 connector
IN/OUT
Mains Connections 1x PowerCON TRUE1 In
1x PowerCON TRUE1 Out
Controls 1xSpeakers Coupling (7 presets)
1x HF Compensation (8 presets)
1x Input Attenuation Rotary Switch
Mechanics
Housing Multiplex plywood
Polyurea painted
Handles 1x Side, 2 on back
Raincover Included
Rigging Points Integrated 3-point flying hardware
Width 600 mm (25.98 in)
Height 260 mm (10.23 in)
Depth 390 mm (15.35 in)
Weight 18.1 kg (39.9 lbs)
3 andra produkter i samma kategori:
Tap to zoom
