DB Aktiv subwoofer, flygbar till VIOL210, 1x18", 1600W RMS
FEATURES
• Active single 18” horn loaded subwoofer
• Last generation Digipro G4 Amp Technology
• 1600 W RMS class D DIGIPRO G4 amplifier with PFC
• System Auto-Test for quick diagnostics
• Integrated flying hardware (compatible with VIO L210)
• Designed for maximum efficiency in the lower end
• On board delay for perfect time alignment
• On board cardioid array configuration preset
• Modular slot for network and digital audio expansion cards
dB Technologies developed a horn-loaded design, while maintaining the size of a front-loaded sub cabinet, resulting in a double advantage: smaller dimension (and weight – only 45,1 kg) and a remarkable lower frequencies response even at a long distance.
This makes this sub the perfect low-end extension of VIO arrays whenever a particularly long-throw is needed.
The system’s acoustical plus points are boosted by Digipro G4® 1600W Class D amplifier, the last generation of the Digipro amp technology which strongly contributed to the success of many dB Technologies’ professional powered series. Equipped with PFC (Power Factor Correction) and SMPS, VIO S118 is highly resistant to line voltage fluctuations.
Digipro G4 pre-amp features a slot module allowing system monitoring and control via RD Net. Furthermore, the system is ready for future upgrades with Dante digital audio transmission network: in facts, VIO S118 also features a NFC system and a LED on the front grille.
The amps also allow users to run auto-test on electronics and transducers before and after use.
The amp module features an on board attenuation control and a delay module allowing to reach a max 9.9 ms delay with 0.1 ms steps. The on board cardioid preset process the sound of the backward sub in cardioid configurations (both flown or ground stacked).
S118’s cabinet is made of sturdy Multiplex plywood covered with a black polyuria finish and equipped with integrated hardware allowing 1 or more subs to be flown in a sub array or on the top of a VIO L210 array.
The system can be flown via DRK-210 flybar plus FSA-VIO L210 adapter for attaching VIO L210. GSA VIO L210 is necessary for stacked configurations with VIO L210.
The dedicated DO-VIOS118 trolley can be hooked directly on flown subs easing dismantling and transport operations.
Technical Data
Speaker Type Active Horn-Loaded Flyable Subwoofer
Acoustical data
Frequency Response [- 6 dB] 36 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB] 33 Hz (HPF)
Max SPL 139 dB
LF 1x18", Neodymium
Voice Coil LF 4"
Directivity Omnidirectional
Amplifier
Amp Technology Digipro® G4
Amp Class Class D
RMS Power 1600 W
Peak Power 3200 W
Cooling Convection
Power Supply 1600 W with PFC
Processor
Controller DSP 32 bit 96 kHz
Limiter RMS, Peak, Thermal
Delay Option 0-9.9 ms internal
Steps of 0.1 ms
Crossover Frequency LF-HF 60-110 Hz + Full range
LF-X-over out slope 24 dB/Octave
Input
Signal Input 1xXLR balanced
Signal Output 1x XLR balanced (link or X-Over)
1xRJ45 LINK (RDNet)
Expansion Card 1xRJ45 IN (RDNet)
1xRJ45 LINK (RDNet)
Power Socket 1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls 1x Input Attenuation Rotary Switch
1x Rotary Encoder (Delay 9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid Mode Switch
1x X-Over Freq Switch (60-110 Hz + Full Range)
1x System Auto-test
Mechanics
Housing Multiplex plywood
Polyurea painted
Handles 2x Per Side
Aluminium
Pole Mount M20 Thread
Raincover Included
Rigging Points 2xPick Points on top to fix DRK-210
rigging frame (stack use)
4x Pick Points on top and 4x on bottom for rigging
Width 720 mm (28.34 in)
Height 520 mm (20.47 in)
Depth 695 mm (27.36 in)
Weight 45.1 kg (99.42 lbs)
FEATURES
• Active single 18” horn loaded subwoofer
• Last generation Digipro G4 Amp Technology
• 1600 W RMS class D DIGIPRO G4 amplifier with PFC
• System Auto-Test for quick diagnostics
• Integrated flying hardware (compatible with VIO L210)
• Designed for maximum efficiency in the lower end
• On board delay for perfect time alignment
• On board cardioid array configuration preset
• Modular slot for network and digital audio expansion cards
dB Technologies developed a horn-loaded design, while maintaining the size of a front-loaded sub cabinet, resulting in a double advantage: smaller dimension (and weight – only 45,1 kg) and a remarkable lower frequencies response even at a long distance.
This makes this sub the perfect low-end extension of VIO arrays whenever a particularly long-throw is needed.
The system’s acoustical plus points are boosted by Digipro G4® 1600W Class D amplifier, the last generation of the Digipro amp technology which strongly contributed to the success of many dB Technologies’ professional powered series. Equipped with PFC (Power Factor Correction) and SMPS, VIO S118 is highly resistant to line voltage fluctuations.
Digipro G4 pre-amp features a slot module allowing system monitoring and control via RD Net. Furthermore, the system is ready for future upgrades with Dante digital audio transmission network: in facts, VIO S118 also features a NFC system and a LED on the front grille.
The amps also allow users to run auto-test on electronics and transducers before and after use.
The amp module features an on board attenuation control and a delay module allowing to reach a max 9.9 ms delay with 0.1 ms steps. The on board cardioid preset process the sound of the backward sub in cardioid configurations (both flown or ground stacked).
S118’s cabinet is made of sturdy Multiplex plywood covered with a black polyuria finish and equipped with integrated hardware allowing 1 or more subs to be flown in a sub array or on the top of a VIO L210 array.
The system can be flown via DRK-210 flybar plus FSA-VIO L210 adapter for attaching VIO L210. GSA VIO L210 is necessary for stacked configurations with VIO L210.
The dedicated DO-VIOS118 trolley can be hooked directly on flown subs easing dismantling and transport operations.
Technical Data
Speaker Type Active Horn-Loaded Flyable Subwoofer
Acoustical data
Frequency Response [- 6 dB] 36 Hz to Cut Freq (X-Over Dependent)
Frequency Response [- 10 dB] 33 Hz (HPF)
Max SPL 139 dB
LF 1x18", Neodymium
Voice Coil LF 4"
Directivity Omnidirectional
Amplifier
Amp Technology Digipro® G4
Amp Class Class D
RMS Power 1600 W
Peak Power 3200 W
Cooling Convection
Power Supply 1600 W with PFC
Processor
Controller DSP 32 bit 96 kHz
Limiter RMS, Peak, Thermal
Delay Option 0-9.9 ms internal
Steps of 0.1 ms
Crossover Frequency LF-HF 60-110 Hz + Full range
LF-X-over out slope 24 dB/Octave
Input
Signal Input 1xXLR balanced
Signal Output 1x XLR balanced (link or X-Over)
1xRJ45 LINK (RDNet)
Expansion Card 1xRJ45 IN (RDNet)
1xRJ45 LINK (RDNet)
Power Socket 1xPowerCON TRUE1 IN
1xPowerCON TRUE1 OUT
Controls 1x Input Attenuation Rotary Switch
1x Rotary Encoder (Delay 9.9 ms)
1x Polarity Inversion Switch (0° or 180°)
1x Cardioid Mode Switch
1x X-Over Freq Switch (60-110 Hz + Full Range)
1x System Auto-test
Mechanics
Housing Multiplex plywood
Polyurea painted
Handles 2x Per Side
Aluminium
Pole Mount M20 Thread
Raincover Included
Rigging Points 2xPick Points on top to fix DRK-210
rigging frame (stack use)
4x Pick Points on top and 4x on bottom for rigging
Width 720 mm (28.34 in)
Height 520 mm (20.47 in)
Depth 695 mm (27.36 in)
Weight 45.1 kg (99.42 lbs)
3 andra produkter i samma kategori:
Tap to zoom
